Garage door repair DIY

A correctly working garage door might stop working all of a sudden. Whether you have a roll-up door or swing-up door, both work on spring tension. The spring might need fixing, or there might be some other fault that needs attention. Getting a garage door repaired by a professional garage repair service provider is preferred by many; however, it might become expensive at times. In such cases garage door repair DIY becomes helpful.

Garage door repair DIY steps

It becomes easy to repair the garage door yourself if one follows the following steps:

  1. Check the tracks on which the garage door runs and the brackets that hold the tracks. If these are lost you can tighten them.
  2. Check the alignment of the tracks. If the tracks are not aligned, make the brackets lose so that the doors can run down properly.
  3. Clean the tracks so that no dirt might stop the door from running smoothly on the track.
  4. Tighten all the loose parts of the garage door. The screws, hinges, and other parts that have become loose should be fixed.
  5. Replace any damaged screws or bolts. Where holes in the wall to place the screws have become large, replace the current screws with longer ones.
  6. If the wood where hinges fit become cracked, remove the hinges and fill the cracks.

Following these simple steps will help you do the initial repair of the garage door yourself. If needed, you can also call for professional help if the garage door still needs further attention.

Cypress Garage and Gates provide all the necessary help to all its clients and ensures to satisfy customers in the best possible manner. So, if you have tried all the required repair steps and still are not able to repair the garage door, call our experts, and we will be able to help you.

Main Menu
Scroll Up
Schedule Appointment


X